exact! Audio Scanspeak D3004

exact! Audio Scanspeak D3004

25 mm ScanSpeak ?Illuminator?Kalottenhochtöner

• High-End Kalottenhochtöner mit Gewebemembran
• kompakte Konstruktion mit Neodym-Magnetsystem und Aluminiumgehäuse
• 25 mm Schwingspule auf belüftetem Aluminiumträger
• extrem glatter Frequenzgang auch ausserhalb der Achse
• sehr niedrige Resonanzfrequenz durch angekoppeltes Volumen
• ab 2.0 kHz einsetzbar
• unerreicht gute Auflösung feinster Details

The Illuminator tweeters continue on with the heritage of the renowned Revelator D29. The large-roll surround and textile dome diaphragm provide a flat frequency response to above 30KHz with outstanding off-axis dispersion.
The face plates are die cast in aluminum for a beautiful look with maximum mechanical stability.
D3004/602000 is optimized to offer small package sizes that can fit into tight spaces such as compact cabinets and automotive trim pieces.
The back chamber is die cast in aluminium and designed with a contoured shape that functions as a heat sink in high power applications.
Driver Highlights: 1? soft dome, compact size, ring neodymium magnet, aluminium faceplate and house, protective grill.

Electrical Data exact! Audio Scanspeak D3004

• Nominal impedance Zn 4 ohm
• Minimum impedance Zmin 3.5 ohm
• Maximum impedance Zo 10.8 ohm
• DC resistance Re 3 ohm
• Voice coil inductance Le 0.02 mH

T-S Parameters exact! Audio Scanspeak D3004

• Resonance Frequency fs 700 Hz
• Mechanical Q factor Qms 4.15
• Electrical Q factor Qes 1.6
• Total Q factor Qts 1.15
• Force factor Bl 1.7 Tm
• Mechanical resistance Rms 0.4 Kg/s
• Moving mass Mms 0.35 g
• Suspension compliance Cms 0.15 mm/N
• Effective cone diameter D -- cm
• Effective piston area Sd 7 cm2
• Equivalent volume Vas -- ltrs
• Sensitivity (2.83V/1m) 89.2 dB

Power handling exact! Audio Scanspeak D3004

• 100h RMS noise test (IEC) 50 W
• Long-term Max Power (IEC 18.3) 130 W
• Short Term Max power (IEC 18.2) -- W

Note: IEC 268-5 noise signal is used for the powertest. Long term power test is a recommended system amplifier size. Tested according to IEC 268-5 chapter 18.3.

Voice Coil and Magnet Parameters exact! Audio Scanspeak D3004

• Voice coil diameter 26 mm
• Voice coil height 2.1 mm
• Voice coil layers 2
• Height of the gap 2.5 mm
• Linear excursion +/- 0.2 mm
• Max mech. excursion +/- 1.6 mm
• Flux density of gap -- mWb
• Total useful flux -- mWb
• Diameter of magnet 42 mm
• Height of magnet 4 mm
• Weight of magnet -- Kg

Notes:IEC specs refer to IEC 60268-5 third edition. All Tymphany products are RoHS compliant.